Voltage Fluctuation: Time to Call an Electrician

If your lights flicker when you turn on an appliance with a high wattage, the reason could be because the voltage in your home is fluctuating too much. If the flickering lasts longer than the use of the appliance, this could be a symptom of a more serious electrical issue. Other signs that the voltage in your home isn't right include lights that dim unexpectedly or that frequently burn out. Electricity typically flows into homes at around 120 volts. Although a little fluctuation is normal, your home should always be supplied with between 115 and 125 volts. You can check the voltage in your home by purchasing a device called a voltmeter. If your readings average above the desired range, you’ve found the cause of your lighting problem(s). In some cases, an appropriate solution is to purchase 130-volt light bulbs which can handle a higher voltage. However, it is always best to double check with an electrician.

Loose Electrical Wiring: Time to Call an Electrician

Loose wiring is the most serious reason for flickering lights and a main cause of house fires. Shut off the light at the circuit breaker before removing the fixture to double check the wiring. If the fixture looks like it might be loose or insecure, it’s time to call an electrician. And even after this, if you still haven’t found a reason for your flickering lights, call an electrician to evaluate your home's electrical wiring to be on the safe side.

• What Is Smart Wiring?

  It is a system that combines various types of wires inside a home into a single platform. The wiring system allows homeowners to integrate their smart technology, such as home security systems and sensors, throughout their homes. It is cheap to use smart wiring.

• set up an appointment to have an electrical inspection our phone number

• 786)285-5753

• Choose the Right Service for You Below

• Electrical Panel Rapair

• Lighting Installation

• Exterior Lighting

• Electrical Installation

• Electrical Repair

    10 signs you should think about rewiring your home
    Over half of home electrical fires are related to wiring problems. Is your home at risk?

 Warning signs 

     An electrical system will often display signs when there are potential problems. If you notice any of these warning signs, have an electrician inspect your             electrical system:

1. Frequent blown fuses or tripped breakers

2. An over-amped or over-fused electrical panel

3. Dimming or flickering lights, indicating the circuit is overloaded or has a loose connection

4. Hot or discolored switch plates, cords, or plugs

5. Light bulbs that frequently burn out in a socket, signaling a fixture that can't handle the bulb wattage

6. Buzzing or sizzling sounds

7. A burning smell

8. Arcs or sparks from an outlet when you plug or unplug a cord

9. Loose outlets

10. Cracked, cut, or broken insulation

11. Electrical shock when you plug in or touch a cord

Why you should consider Upgrading  your Electrical Panel.

A new electrical panel ensures that your home will continue a steady flow of electricity. Not only will you eliminate problems with flickering lights and burnt out appliances, but you will also be able to add more appliances without tripping your breaker, blowing fuses, or damaging current appliances.